The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates. This document provides specific update, installation and troubleshooting information. What is included in a Remote Firmware Update (RFU)?
The HP LaserJet Printer Remote Firmware Update file contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP LaserJet Printer firmware for the engine and all connected accessories are upgraded. Who needs this firmware? A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below. Determining the current version level of your firmware To determine the current level of firmware installed on the device: Go to the printer's control panel.
Press the green checkmark button. Use the arrow keys and select the 'INFORMATION' selection on the control panel. Use the arrow keys and select the 'PRINT CONFIGURATION' selection. Press the green checkmark button to print the Configuration Page. On the printed CONFIGURATION page look in the section marked 'Device Information' for the firmware date code. The firmware date code will look something like this: 20051204 46.029.3.
Applications Supported Adobe Illustrator Adobe Indesign Adobe Photoshop CorelDraw EPSF Charts MacroMedia FreeHand QuarkXpress Text Format (ASCII) TIFF Charts This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then turn on the computer. Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download Now and a File Download box will appear. Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed. Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c: lj4700). However, you can change the path and directory name at the time of extracting the file. NOTE: See the Howtopan.pdf file for detailed installation instructions.
The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP Color LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates. What is included in a Remote Firmware Update (RFU)? The HP Color LaserJet Printer Remote Firmware contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP Color LaserJet Printer firmware for the engine and all connected accessories are upgraded. Who needs this firmware? Similar to Hewlett Packard providing improved software for your HP Color LaserJet Printer, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle.
A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below. Determining the current version level of your firmware To determine the current level of firmware installed on the device: Go to the printer's control panel. Press the green checkmark button. Use the arrow keys and select the 'INFORMATION' selection on the control panel. Use the arrow keys and select the 'PRINT CONFIGURATION' selection.
Press the green checkmark button to print the Configuration Page. On the printed CONFIGURATION page look in the section marked 'Device Information' for the firmware date code. The firmware date code will look something like this: 20080306 46.034.1. Applications Supported Adobe Illustrator Adobe Indesign Adobe Photoshop CorelDraw EPSF Charts MacroMedia FreeHand QuarkXpress Text Format (ASCII) TIFF Charts Download Info This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download Now and a File Download box will appear. Select Save This Program to Disk and a Save As box will appear. Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c: lj4700). However, you can change the path and directory name at the time of extracting the file.
NOTE: See the Howtopan.pdf file for detailed installation instructions. This download package contains HP LaserJet Mac OS X Installer with Printer Utility Software Solution v7.8.0.761. Included are the HP Mac driver files (v4.3.1) and HP Printer Utility for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor. Supported Devices HP Color LaserJet 3000 HP Color LaserJet 3800 HP Color LaserJet 4700 HP Color LaserJet 4730mfp HP Color LaserJet CP4005 HP Color LaserJet CP6015 HP LaserJet P3004 HP LaserJet P3005 HP LaserJet 5200 HP LaserJet 5200L HP LaserJet M3027 mfp HP LaserJet M3035 mfp HP LaserJet M4345 mfp HP LaserJet M5025 mfp HP LaserJet M5035 mfp.
Marketing Resources software is a suite of tools that can help you produce professional-quality marketing material by using your own HP Color LaserJet product. Often, producing marketing material 'in house' is faster and less expensive than sending the job to an external print-service provider. Using these tools offers the following advantages: Saves time – You control the schedule. You no longer need to drive to the print shop and wait for the job to be ready.
Saves money – By using your own HP product, you can avoid the setup charges that print shops often include. You are in complete control over the document, and you can decide which options to use. This software supports Mac OS X v10.3.x, v10.4.x and v10.5.x. HP Marketing Resources software is a suite of tools that can help you produce professional-quality marketing material by using your own HP Color LaserJet product. Often, producing marketing material 'in house' is faster and less expensive than sending the job to an external print-service provider.
Using these tools offers the following advantages: Saves time – You control the schedule. You no longer need to drive to the print shop and wait for the job to be ready.
Saves money – By using your own HP product, you can avoid the setup charges that print shops often include. You are in complete control over the document, and you can decide which options to use.
This software supports Mac OS X v10.3.9 and v10.4. Download Info Below are easy-to-follow instructions for downloading and installing printer drivers. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then the computer. Close any screen savers, virus protection programs, or other software programs that are running on your computer. Download the file to your hard drive, and double click on the file.
Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the file.
You will have an opportunity to change the drive and directory. Download Info Below are easy-to-follow instructions for downloading and installing printer drivers. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then the computer.
Hp Laserjet 4700 Printer
Close any screen savers, virus protection programs, or other software programs that are running on your computer. Download the file to your hard drive, and double click on the file.
Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the file.
You will have an opportunity to change the drive and directory. Below are easy-to-follow instructions for downloading and installing printer drivers. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then the computer. Close any screen savers, virus protection programs, or other software programs that are running on your computer. Download the file to your hard drive, and double click on the file.
Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700).
The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the file. You will have an opportunity to change the drive and directory. Below are easy-to-follow instructions for downloading and installing printer drivers.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then the computer.
Close any screen savers, virus protection programs, or other software programs that are running on your computer. Download the file to your hard drive, and double click on the file.
Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the file. You will have an opportunity to change the drive and directory.
This download is only for 'Itanium' editions of Microsoft 64 bit operating systems. It will not work on 'x64' editions This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then turn on the computer. Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download Now and a File Download box will appear. Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed. Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers). Update the printer if it was previously installed Right click on the printer and select Properties from the pop menu. On the General tab, select New Driver. Click on the Warning Box that pops up. A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears. Click the Browse to locate the expanded files directory (i.e., c: clj4700). Click on the file ending with.inf.
Click Open and then Okay and let files install. Add the printer if it hasn't been installed yet. Click Add New Printer Follow the instructions of the Add Printer Wizard. This download is only for 'Itanium' editions of Microsoft 64 bit operating systems. It will not work on 'x64' editions This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear. Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed. Double click on the file.
This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700). However, you can change the path and directory name at the time of extracting the file. Open the Printers Window (Click Start-Settings-Printers). Update the printer if it was previously installed Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver. Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk. Another box Install from Disk appears. Click the Browse to locate the expanded files directory (i.e., c: clj4700). Click on the file ending with.inf. Click Open and then Okay and let files install. Add the printer if it hasn't been installed yet.
Click Add New Printer Follow the instructions of the Add Printer Wizard. This download is only for 'Itanium' editions of Microsoft 64 bit operating systems. It will not work on 'x64' editions This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer. Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download Now and a File Download box will appear. Select Save This Program to Disk and a Save As box will appear. Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700). However, you can change the path and directory name at the time of extracting the file. Open the Printers Window (Click Start-Settings-Printers). Update the printer if it was previously installed Right click on the printer and select Properties from the pop menu. On the General tab, select New Driver.
Click on the Warning Box that pops up. A printer listing box will appear. Select Have Disk. Another box Install from Disk appears. Click the Browse to locate the expanded files directory (i.e., c: clj4700). Click on the file ending with.inf.
Click Open and then Okay and let files install. Add the printer if it hasn't been installed yet. Click Add New Printer Follow the instructions of the Add Printer Wizard.
This download is only for 'Itanium' editions of Microsoft 64 bit operating systems. It will not work on 'x64' editions This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then turn on the computer. Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download Now and a File Download box will appear. Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed. Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700). However, you can change the path and directory name at the time of extracting the file. Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed Right click on the printer and select Properties from the pop menu. On the General tab, select New Driver. Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk. Another box Install from Disk appears. Click the Browse to locate the expanded files directory (i.e., c: clj4700).
Click on the file ending with.inf. Click Open and then Okay and let files install. Add the printer if it hasn't been installed yet. Click Add New Printer Follow the instructions of the Add Printer Wizard. This download is only for 'Itanium' editions of Microsoft 64 bit operating systems.
It will not work on 'x64' editions This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download and a File Download box will appear. Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed. Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700). However, you can change the path and directory name at the time of extracting the file. Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed Right click on the printer and select Properties from the pop menu. On the General tab, select New Driver. Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk. Another box Install from Disk appears. Click the Browse to locate the expanded files directory (i.e., c: clj4700). Click on the file ending with.inf. Click Open and then Okay and let files install. Add the printer if it hasn't been installed yet.
Click Add New Printer Follow the instructions of the Add Printer Wizard. This download is only for 'Itanium' editions of Microsoft 64 bit operating systems. It will not work on 'x64' editions This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then turn on the computer. Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear. Select Save This Program to Disk and a Save As box will appear. Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed. Double click on the file.
This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700).
However, you can change the path and directory name at the time of extracting the file. Open the Printers Window (Click Start-Settings-Printers). Update the printer if it was previously installed Right click on the printer and select Properties from the pop menu. On the General tab, select New Driver.
Click on the Warning Box that pops up. A printer listing box will appear.
Select Have Disk. Another box Install from Disk appears. Click the Browse to locate the expanded files directory (i.e., c: clj4700). Click on the file ending with.inf. Click Open and then Okay and let files install. Add the printer if it hasn't been installed yet.
Click Add New Printer Follow the instructions of the Add Printer Wizard. Applications Supported Adobe Illustrator Adobe Indesign Adobe Photoshop CorelDraw EPSF Charts MacroMedia FreeHand QuarkXpress Text Format (ASCII) TIFF Charts Download Info This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then turn on the computer. Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear. Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c: lj4700). However, you can change the path and directory name at the time of extracting the file. NOTE: See the Howtopan.pdf file for detailed installation instructions. Applications Supported Adobe Illustrator Adobe Indesign Adobe Photoshop CorelDraw EPSF Charts MacroMedia FreeHand QuarkXpress Text Format (ASCII) TIFF Charts This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer. Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download Now and a File Download box will appear. Select Save This Program to Disk and a Save As box will appear. Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed. Double click on the file.
This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c: lj4700). However, you can change the path and directory name at the time of extracting the file. NOTE: See the Howtopan.pdf file for detailed installation instructions. The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP Color LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates. What is included in a Remote Firmware Update (RFU)?
The HP Color LaserJet Printer Remote Firmware contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP Color LaserJet Printer firmware for the engine and all connected accessories are upgraded. Who needs this firmware?
Similar to Hewlett Packard providing improved software for your HP Color LaserJet Printer, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle. A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below. Determining the current version level of your firmware To determine the current level of firmware installed on the device: Go to the printer's control panel. Press the green checkmark button. Use the arrow keys and select the 'INFORMATION' selection on the control panel. Use the arrow keys and select the 'PRINT CONFIGURATION' selection.
Press the green checkmark button to print the Configuration Page. On the printed CONFIGURATION page look in the section marked 'Device Information' for the firmware date code. The firmware date code will look something like this: 20080306 46.034.1. The Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer.
Installation instructions are provided for Single and Multiple Printer Updates. This document provides specific update, installation and troubleshooting information. What is included in a Remote Firmware Update (RFU)? The HP LaserJet Printer Remote Firmware Update file contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file.
When the Remote Firmware Upgrade file is sent to the HP LaserJet Printer firmware for the engine and all connected accessories are upgraded. Who needs this firmware?
A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below. Determining the current version level of your firmware To determine the current level of firmware installed on the device: Go to the printer's control panel. Press the green checkmark button. Use the arrow keys and select the 'INFORMATION' selection on the control panel. Use the arrow keys and select the 'PRINT CONFIGURATION' selection.
Press the green checkmark button to print the Configuration Page. On the printed CONFIGURATION page look in the section marked 'Device Information' for the firmware date code.
The firmware date code will look something like this: 20051204 46.029.3. This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print. Turn on the printer first, then turn on the computer. Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear. Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed. Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers). Update the printer if it was previously installed Right click on the printer and select Properties from the pop menu. On the General tab, select New Driver. Click on the Warning Box that pops up. A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears. Click the Browse to locate the expanded files directory (i.e., c: clj4700).
Click on the file ending with.inf. Click Open and then Okay and let files install. Add the printer if it hasn't been installed yet. Click Add New Printer Follow the instructions of the Add Printer Wizard. This section will help you in the download of the software to your computer and start you on the install process. Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer. Close any screen savers, virus protection programs, or other software programs running on your computer. Click on Download Now and a File Download box will appear. Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save. Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c: clj4700). However, you can change the path and directory name at the time of extracting the file. Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed Right click on the printer and select Properties from the pop menu. On the General tab, select New Driver. Click on the Warning Box that pops up. A printer listing box will appear. Select Have Disk. Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c: clj4700). Click on the file ending with.inf. Click Open and then Okay and let files install. Add the printer if it hasn't been installed yet. Click Add New Printer Follow the instructions of the Add Printer Wizard.
Check the speed of the host computer and the hardware configuration of the printer. The update time depends on the specific hardware configuration of the printer, such as the number of EIO devices installed, the presence of external paper-handling devices and / or other features such as Fax capabilities (MFPs). The elapsed time for an update depends on the I/O transfer time, which depends on a number of things. These include the speed of the host computer that is sending the update and the I/O method (Local Port or network), as well as the time that it takes for the printer reinitialize. If the remote firmware update process is interrupted before the firmware is downloaded (while RECEIVING UPGRADE appears on the control-panel display), then the firmware file must be sent again.
If power is lost during the update process (while PERFORMING UPGRADE appears on the control-panel display), the update will be interrupted. The message RESEND UPGRADE or a similar message will then appear (in English only) on the control panel display. If this message is displayed the firmware update may now require that the update be sent only by a computer that is attached to the parallel or USB port of the printer.